Role of Silk Fibroin in Modulating Thermo-responsive Behavior of PNIPAM Hydrogels

Authors

https://doi.org/10.48313/bic.vi.62

Abstract

Thermo-responsive hydrogels based on Poly N-Isopropylacrylamide (PNIPAM) have attracted significant attention for advanced biomedical applications due to their smart response near physiological temperature. In this study, Silk Fibroin (SF) was incorporated into PNIPAM hydrogels to develop a tunable composite system with enhanced physicochemical properties. The hydrogels were successfully synthesized via free radical polymerization, and the effect of SF content (0–15 wt%) on the thermo-responsive behavior, swelling characteristics, deswelling kinetics, and network stability was systematically investigated. The results demonstrated that the incorporation of SF led to a gradual increase in the Lower Critical Solution Temperature (LCST), shifting from 32.1 °C for pure PNIPAM to 34.6 °C for the highest SF content. Swelling studies revealed a reduction in equilibrium Swelling Ratio (SR) with increasing SF concentration at 25 °C, while maintaining controlled water retention above LCST. Deswelling analysis showed a more gradual water release behavior in SF-containing hydrogels compared to pure PNIPAM, indicating improved regulation of thermo-responsive collapse. Additionally, gel fraction results confirmed enhanced network stability and crosslinking efficiency with increasing SF content, reaching up to 90.3%. Overall, the incorporation of SF effectively modulated the structural and thermo-responsive properties of PNIPAM hydrogels, resulting in a more stable and controllable hydrogel system. These findings highlight the potential of PNIPAM/SF composite hydrogels for biomedical applications such as controlled drug delivery, tissue engineering, and smart biomaterials.

Keywords:

Poly N-Isopropylacrylamide, Silk fibroin, Thermo-responsive hydrogels, Lower critical solution temperature, Swelling behavior, Gel fraction

References

  1. [1] Ding, Z., Burghoff, S., Buchheiser, A., Kögler, G., & Schrader, J. (2013). Survival, integration, and differentiation of unrestricted somatic stem cells in the heart. Cell transplantation, 22(1), 15–27. https://doi.org/10.3727/096368912X640466
  2. [2] Fallahi-Sichani, M., Soleimani, M., Najafi, S. M. A., Kiani, J., Arefian, E., & Atashi, A. (2007). In vitro differentiation of cord blood unrestricted somatic stem cells expressing dopamine-associated genes into neuron-like cells. Cell biology international, 31(3), 299–303. https://doi.org/10.1016/j.cellbi.2006.11.011
  3. [3] Hashemi, S. M., Soleimani, M., Zargarian, S. S., Haddadi-Asl, V., Ahmadbeigi, N., Soudi, S., ... & Mohammadi, Y. (2009). In vitro differentiation of human cord blood-derived unrestricted somatic stem cells into hepatocyte-like cells on poly (ε-caprolactone) nanofiber scaffolds. Cells tissues organs, 190(3), 135-149. https://doi.org/10.1159/000187716
  4. [4] Soleimani, M., Khorsandi, L., Atashi, A., & Nejaddehbashi, F. (2014). Chondrogenic differentiation of human umbilical cord blood-derived unrestricted somatic stem cells on a 3D beta-tricalcium phosphate-alginate-gelatin scaffold. Cell journal (Yakhteh), 16(1), 43-52. https://doi.org/24518974
  5. [5] Keshel, S. H., Biazar, E., Rezaei Tavirani, M., Rahmati Roodsari, M., Ronaghi, A., Ebrahimi, M., … & Afsordeh, K. (2014). The healing effect of unrestricted somatic stem cells loaded in collagen-modified nanofibrous PHBV scaffold on full-thickness skin defects. Artificial cells, nanomedicine, and biotechnology, 42(3), 210–216. https://doi.org/10.3109/21691401.2013.800080
  6. [6] Sepantafar, M., Maheronnaghsh, R., Mohammadi, H., Rajabi-Zeleti, S., Annabi, N., Aghdami, N., & Baharvand, H. (2016). Stem cells and injectable hydrogels: Synergistic therapeutics in myocardial repair. Biotechnology advances, 34(4), 362–379. https://doi.org/10.1016/j.biotechadv.2016.03.003
  7. [7] Radhakrishnan, J., Krishnan, U. M., & Sethuraman, S. (2014). Hydrogel based injectable scaffolds for cardiac tissue regeneration. Biotechnology advances, 32(2), 449–461. https://doi.org/10.1016/j.biotechadv.2013.12.010
  8. [8] Yoshizumi, T., Zhu, Y., Jiang, H., D’Amore, A., Sakaguchi, H., Tchao, J., … & Wagner, W. R. (2016). Timing effect of intramyocardial hydrogel injection for positively impacting left ventricular remodeling after myocardial infarction. Biomaterials, 83, 182–193. https://doi.org/10.1016/j.biomaterials.2015.12.002
  9. [9] Tous, E., Ifkovits, J. L., Koomalsingh, K. J., Shuto, T., Soeda, T., Kondo, N., … & Burdick, J. A. (2011). Influence of injectable hyaluronic acid hydrogel degradation behavior on infarction-induced ventricular remodeling. Biomacromolecules, 12(11), 4127–4135. https://doi.org/10.1021/bm201198x
  10. [10] Nishimura, T., Sumi, N., Mukai, S., Sasaki, Y., & Akiyoshi, K. (2019). Supramacromolecular injectable hydrogels by crystallization-driven self-assembly of carbohydrate-conjugated poly (2-isopropyloxazoline) s for biomedical applications. Journal of materials chemistry b, 7(41), 6362–6369. https://doi.org/10.1039/C9TB00918C
  11. [11] Young, S. A., Riahinezhad, H., & Amsden, B. G. (2019). In situ-forming, mechanically resilient hydrogels for cell delivery. Journal of materials chemistry b, 7(38), 5742–5761. https://doi.org/10.1039/C9TB00918C
  12. [12] Li, Z., Guo, X., & Guan, J. (2012). An oxygen release system to augment cardiac progenitor cell survival and differentiation under hypoxic condition. Biomaterials, 33(25), 5914–5923. https://doi.org/10.1016/j.biomaterials.2012.05.012
  13. [13] Xu, Y., Li, Z., Li, X., Fan, Z., Liu, Z., Xie, X., & Guan, J. (2015). Regulating myogenic differentiation of mesenchymal stem cells using thermosensitive hydrogels. Acta biomaterialia, 26, 23–33. https://doi.org/10.1016/j.actbio.2015.08.010
  14. [14] Pellá, M. C. G., Lima-Tenório, M. K., Tenório-Neto, E. T., Guilherme, M. R., Muniz, E. C., & Rubira, A. F. (2018). Chitosan-based hydrogels: From preparation to biomedical applications. Carbohydrate polymers, 196, 233–245. https://doi.org/10.1016/j.carbpol.2018.05.033
  15. [15] Mohebbi, S., Nezhad, M. N., Zarrintaj, P., Jafari, S. H., Gholizadeh, S. S., Saeb, M. R., & Mozafari, M. (2019). Chitosan in biomedical engineering: A critical review. Current stem cell research & therapy, 14(2), 93–116. https://doi.org/10.2174/1574888X13666180912142028
  16. [16] Matlabi Tala Tepe, S., Mahmoudi, N., & Vaziri, S. A. (2015). Synthesis of bis-chalcones based on 5, 5Î-methylene bis (2-hydroxybenzaldehyde) and screening their antibacterial activit. Applied chemistry today, 9(32), 53-58. (In Persian). https://doi.org/10.22075/chem.2017.681
  17. [17] Jalababu, R., Veni, S. S., & Reddy, K. V. N. S. (2018). Synthesis and characterization of dual responsive sodium alginate-g-acryloyl phenylalanine-poly N-isopropyl acrylamide smart hydrogels for the controlled release of anticancer drug. Journal of drug delivery science and technology, 44, 190–204. https://doi.org/10.1016/j.jddst.2017.12.013
  18. [18] Sun, X. F., Zeng, Q., Wang, H., & Hao, Y. (2019). Preparation and swelling behavior of pH/temperature responsive semi-IPN hydrogel based on carboxymethyl xylan and poly (N-isopropyl acrylamide). Cellulose, 26(3), 1909–1922. https://doi.org/10.1007/s10570-018-2180-x
  19. [19] Mahinroosta, M., Farsangi, Z. J., Allahverdi, A., & Shakoori, Z. (2018). Hydrogels as intelligent materials: A brief review of synthesis, properties and applications. Materials today chemistry, 8, 42–55. https://doi.org/10.1016/j.mtchem.2018.02.004
  20. [20] Niknejad, K., Sharifzadeh Baei, M., & Motallebi Tala Tapeh, S. (2018). Synthesis of metformin hydrochloride nanoliposomes: Evaluation of physicochemical characteristics and release kinetics. International journal of nano dimension, 9(3), 298–313. https://ijnd.tonekabon.iau.ir/article_659887.html
  21. [21] Hynninen, V., Hietala, S., McKee, J. R., Murtomäki, L., Rojas, O. J., Ikkala, O., & Nonappa. (2018). Inverse thermoreversible mechanical stiffening and birefringence in a methylcellulose/cellulose nanocrystal hydrogel. Biomacromolecules, 19(7), 2795–2804. https://doi.org/10.1021/acs.biomac.8b00392
  22. [22] Tapeh, S. M. T., Baei, M. S., & Keshel, S. H. (2021). Synthesis of thermogel modified with biomaterials as carrier for hUSSCs differentiation into cardiac cells: Physicomechanical and biological assessment. Materials science and engineering: C, 119, 111517. https://doi.org/10.1016/j.msec.2020.111517

Downloads

Published

2026-03-20

Issue

Vol. 3 No. 1 (2026): Biocompounds

Section

Articles

How to Cite

Baniasad , A. . (2026). Role of Silk Fibroin in Modulating Thermo-responsive Behavior of PNIPAM Hydrogels. Biocompounds, 3(1), 54-62. https://doi.org/10.48313/bic.vi.62

Similar Articles

1-10 of 17

You may also start an advanced similarity search for this article.